Integrated in the Competition line, these speakers have been developed from some of the most demanded models all over the planet by the Car Audio market in Beyma’s professional line.

PRO 6MI has diameter of 6.5" and is capable of handling very high power: 100 Wrms. Thanks to the special design, optimized to reproduce the midrange frequency, the loudspeaker offers high sensitivity in all models that are around 100 dB.

It’s important to emphasize that although this loudspeaker seems physically intended for woofer or subwoofer; this speaker is not designed to reproduce that frequency range. Meaning we could break it quite easily if we intend to give it such use.

On the contrary, if we use it to reproduce the frequencies for which it is designed, this speaker can generate very high levels with great high quality playback. But always as part of a system in which there also woofers and/or subwoofers to complement it and reproduce the lower frequencies where the midrange loudspeakers, with their special design, can’t.

The cutoff frequency recommended for these speakers not only have to take into account the frequency range, but also the impedance curve of each one of them. Based on these data the recommended cuts would be the following:

PRO6MI:

Minimum lower cutoff frequency (High Pass): 400Hz
Maximum upper cutoff frequency (Low Pass): 5-6 kHz
Higher cutoff frequencies allow greater tolerance, but it is very important to respect the lower ones too. Also, the filtering should have a minimum slope of 12dB per octave (second order filter).

Features:

• High power handling (100 W RMS)
• Excellent sensitivity (98 dB)
• Designed for medium frequencies reproduction

Specifications:

• Peak RMS Each: 100 Watt
• Peak Power Each: 200 Watt
• Nominal diameter: 165 mm. / 6.5 in.
• Nominal impedance: 4 ohms
• Sensitivity: 98 dB 1w @ 1m
• Frequency range: 150 - 8000 Hz
• Voice coil diameter: 38.5 mm. / 1.5 in.
• Bl factor: 6.5 N / A
• Moving mass: 0.007 Kg.